All measurements in millimeters (mm)
Metric DIN 315 wing nuts / butterfly nuts of the German Type have two rounded wing like projections. This unique design makes it possible to use your thumb and forefinger to turn and tighten the nut rather than a having to use a wrench or other tool thus ensuring easy rapid assembly and disassembly using only fingers. DIN 315 wing nuts can be used for many applications where quick hand tensioning and clamping is required
| Thread size (d1) | M4 | M5 | M6 | M8 | M10 | M12 | |
|---|---|---|---|---|---|---|---|
| P | 0,7 | 0,8 | 1 | 1,25 | 1,5 | 1,75 | |
| d2 | max. | 9 | 12 | 14 | 16 | 21 | 24 |
| min. | 7 | 9 | 11 | 13 | 18 | 21 | |
| d3 | max. | 7 | 9 | 11 | 12,5 | 16 | 19 |
| min. | 5,5 | 7,5 | 9 | 10,5 | 14 | 17 | |
| e | max. | 21 | 26,5 | 32 | 38 | 50 | 66 |
| min. | 19 | 24,5 | 29 | 35 | 47 | 63 | |
| g | min. | 1,1 | 1,5 | 1,5 | 2 | 3,6 | 4.1 |
| h | max. | 11 | 13 | 16 | 19 | 24 | 32 |
| min. | 9 | 11 | 14 | 17 | 22 | 29 | |
| m | max. | 4,6 | 6 | 7 | 8,5 | 10 | 13 |
| min. | 3,2 | 4 | 5 | 6,5 | 8 | 10 | |
| r | Edges rounded (radius left unspecified) | ||||||
Disclaimer
Dimensional data and technical information was obtained from publicly available sources and not acquired through standards agencies. It has been completed and compiled for reference purposes only; where discrepancies are found they are subject to change without notice. KAF makes no warranties or representations regarding the accuracy and validity of the compiled information and data. Contact the relevant standards authorities for accurate and detailed information.