All measurements in millimeters (mm)
Metric DIN 936 Low Profile Hex Nuts are similar to a hex jam nut (DIN 439) but with slightly different heights. They are thin hex nuts about half as thick as a regular hex nut. They are often used as lock nuts, where they are threaded up against a standard nut locking it in place or in any circumstance where a standard nut is too thick for an application, a hex jam nut can be a very useful alternative
| d1 | s | e | m |
|---|---|---|---|
| M8 | 13 | 14.38 | 5 |
| M10 | 17 | 18.9 | 6 |
| M12 | 19 | 21.1 | 7 |
| M14 | 22 | 24.49 | 8 |
| M16 | 24 | 26.75 | 8 |
| M18 | 27 | 29.56 | 9 |
| M20 | 30 | 32.95 | 9 |
| M22 | 32 | 35.03 | 10 |
| M24 | 36 | 39.55 | 10 |
| M27 | 41 | 45.2 | 12 |
| M30 | 46 | 50.85 | 12 |
| M33 | 50 | 55.8 | 14 |
| M36 | 55 | 61.31 | 14 |
| M39 | 60 | 66.96 | 16 |
| M42 | 65 | 72.61 | 16 |
| M45 | 70 | 78.26 | 18 |
| M48 | 75 | 83.91 | 18 |
| M52 | 80 | 89.56 | 20 |
Disclaimer
Dimensional data and technical information was obtained from publicly available sources and not acquired through standards agencies. It has been completed and compiled for reference purposes only; where discrepancies are found they are subject to change without notice. KAF makes no warranties or representations regarding the accuracy and validity of the compiled information and data. Contact the relevant standards authorities for accurate and detailed information.