The specific advantage of this Vice is its ability to be set perpendicular to the base, thereby allowing right angle machining on the same machine setting.
Allows for the job to be set at low heights, particularly suitable for the most complicated grinding applications.
Sliding jaw runs on accurately ground surfaces fitted with hardened steel keep strips ensuring perfect alignment and rigidity.
“Hold Down” slots allow for secure clamping of the vice on the work table.
Tilt Lock Machine Vice design is beamlike with two vertical and horizontal rails connected to the base.
You can hold piece parts in the most immobile state possible
Quality
The movable jaw will not lift off the bed.
The body is rigid, and that a minimal amount of bending stresses are created in the clamping area
Deflection of the stationary jaw is minimised.
The bed is guaranteed flat and parallel .0001 per inch.
In addition to the rigid design characteristics, a large heavy nut is drawn up against the machined ways on the inside vice as the movable jaw is drawn down. This creates a heavy mass of material under compression and extremely resistant to bending stresses. 4 Jaws Plate positions allowing extra capacity with the jaw plates in the outside position.
Building Your Business
We are here be to be an extension to your company, so that we may both be successful together.
